Water Leak Detector installation diagram
Callout | Component | Description |
|
|
|
1 | AC adapter | Plugs into a power source |
2 | Base station | Wirelessly transmits information to the Edge server |
3 | Connection point | Connects the base station to the water leak detector |
4 | Water leak detector | Processes the detection of fluid |
5 | Connection point | Connects the water leak detector to the jumper cable |
6 | Jumper cable | Connects the sensing cable to the water leak detector |
7 | Connector | Connects the jumper cable to the sensing cable assembly |
8 | Sensing cable assembly | Detects any fluid |
Installing the HP Current Sensing Relay Base Station
The HP Current Sensing Relay Base Station uses one CT to measure and report the current flowing to electrical equipment, and is typically used to determine whether the equipment is powered on or off. Consult a professional electrician to install the current sensor.
To install a Current Sensing Relay Base Station:
1.Determine the ideal location for the base station, relative to your electrical equipment.
(Optional) Sensor Base Stations 49