Creating Labels Using Internal Batch Software

Function

Settings

Function

Settings

Handshake:

none

F1

CTRL W

Mode:

FDX

F2

CTRL X

Data Bits:

8

F3

CTRL Y

Stop Bits:

1

F4

CTRL Z

Parity:

none

F5

ALT S

Baud Rate:

9600

F6

ALT P

Keys:

US

F7

ALT I

Blk End:

US/CR

F8

ALT X

Auto NL:

on

F9

ALT F

CR:

CR

 

 

Compatible:

LINK MC 2

 

 

Table 3-1 LINK CRT Settings

3.Select Stand-Alone Labeling Software Mode

The Printer is shipped in the RS-232C mode for use with PCs. To use the CRT, turn DIP Switch S1-7 to the ‘on’ position and insert the 256K Flash Module into the Printer before turning the power on. Plug the module into the module slot as described in Section 1.8. Ensure that the lettering is facing toward the front of the Printer. When the Printer is turned on it will recognize that the module has been formatted as an Internal Batch Software Module and will run the Internal Batch Program. If the Module has not been formatted, the following screen will appear:

BATCH SYSTEM INITIALIZATION

INSERT Flash MEMORY MODULE AND PRESS:

I:INITIALIZE NEW MODULE. ENTER: ENTER BATCH SYSTEM. Esc: EXIT TO RS-232C MODE.

28

DMX 400/430 Operator’s Manual