Creating Labels Using Internal Batch Software

3.Enter an alphanumeric name of up to 16 characters for this label, followed by the return key. The message "New Label Format?" appears, answer Y or N. If yes, the cursor moves to the ROT position. If the cursor does not move past the new label format position, the memory module 's write protect switch is ‘on’; turn it ‘off’ to continue.

4.The Printer can print fonts, bar codes, and graphics at 0, 90, 180, or 270 degree rotations. Valid responses to the ROT prompt include:

1

= 0

degrees

2

= 90

degrees

3

=

180

degrees

4

=

270

degrees

5.In the FNT position, enter the type of font you want to print. This can be an alphanumeric font or a bar code. Enter one of the following:

∙An alphanumeric font type, followed by the return key. Choices are 0 through 8. See Appendix C for examples of each available font type and for the actual printed size of the various fonts using different multiplication factors.

∙An alphanumeric CG Triumvirate font type, followed by the return key; the only choice is 9, (see Appendix C for examples of each available font type). The point size is selected in the bar code height field. Values are 001 through 010.

38

DMX 400/430 Operator’s Manual