Creating Labels Using Internal Batch Software

F5 and ALT-S: Calls up the system maintenance screen. All system maintenance functions are described in Section 3.5.

F6 and ALT-P: While in the far left position of the create/modify label screen or the sample: position of the print label screen, press ALT-P to bring up the print parameters window. It will look like this:

PRINT ADJUSTMENTS

HEAT FACTOR:

10

PRINT SPEED:

G

SLEW SPEED:

K

DOT PATTERN:

1 X 1

LABEL ADVANCE:

02.20

FORM EDGE OFFSET:

02.20

ROW OFFSET:

00.00

COLUMN OFFSET:

00.00

COUNT BY:

01

MAX. LABEL WIDTH:

04.10

MAX. LABEL LENGTH:

12.00

CONTINUOUS FORMS:

NO

ACTIVE BUFFERS (1/2)

01

CUT BY (# PER CUT):

0001

SENSOR TYPE:

EDGE

Figure 3-1 ALT-P Screen

Use the arrow keys to move from one position to the next. Key in any values that need to be changed. Press the Esc key to exit the window. A description of each print parameter along with default values and valid settings are listed in Table 3-2.

32

DMX 400/430 Operator’s Manual