HP DMXTM 400/430 3.5System Maintenance Screen, Warning, Test and Format Module:, Figure 3-6System Maintenance Menu

Creating Labels Using Internal Batach Software

3.5System Maintenance Screen

The third screen, system maintenance, is used to format and copy memory modules, print test labels, and perform several other maintenance functions.

To access the screen in the label name position of the create/modify label screen or print label screen , use ALT-S. The screen will look like this:

SYSTEM MAINTENANCE

1)TEST AND FORMAT MODULE.

2)COPY MODULE.

3)METRIC ? NO.

4)PRINT TEST LABEL.

5)SYSTEM TEST LABEL.

6)EDIT MODULE NAME.

7)RESET PRINTER.

8)EXIT TO RS-232C SYSTEM.

9)PACK MODULE DATA.

ENTER NUMBER: ________

Figure 3-6 System Maintenance Menu

To exit the screen, press the Esc key. All system maintenance screen choices are explained below:

Test and Format Module: Used to format or reformat the memory of a Flash Module. Tests the memory module to see that it properly functions, and that it is capable of erasing and loading data.

This test destroys all existing memory module data!

Follow the prompts to perform the test.

Warning

DMX 400/430 Operator’s Manual 51