Creating Labels Using Internal Batch Software

4.In the sample position, there are two choices:

a.Print a sample label to check data placement by pressing the Y key for yes. A sample label will print and the cursor will return to the sample position. At this point, you can proceed to step b or you can stop the run by pressing the up arrow key to move the cursor back to the label name position. Press the F1 key to re-edit your format in the create/modify label screen.

b.If you do not need a sample, press the N key for ‘no’, or use the return key. The number of labels you requested will be printed. After the print job request is sent to the Printer, the cursor will move back to the label name position. Additional print jobs can now be sent to the Printer or you can return to the create/modify label screen.

50

DMX 400/430 Operator’s Manual