Creating Labels Using Internal Batach Software

3.3 Create/Modify Label Screen

This section describes how to create a new label. Before beginning, a good tool to have on hand is a ruler marked in tenths of an inch because all the label format print positions are specified in tenths and hundredths of an inch. The procedure for creating a new label is as follows:

1.Power up the CRT terminal with the switch on the front of the unit. Turn the Printer on with the power switch located in the back of the Printer. The CRT screen will look like this:

PRINT LABEL

MODULE NAME: ________________

LABEL NAME: ________________

QUANTITY: ________________

Figure 3-2 Print Label Screen Header

Press the F1 key, and the screen will look like this:

CREATE/MODIFY LABEL

MODULE NAME: ________________

LABEL NAME: ________________

ROT FNT XW XH BH ROW COL TYPE DATA/PROMPT

----- -- -- -- -- -- --- -- ------

Figure 3-3 Create/Modify Label Screen Header

DMX 400/430 Operator’s Manual

35