Creating Labels Using Internal Batach Software
Description | Default | Range |
Heat Factor | 10 | 0 to 20 |
Print Speed | G | C-G |
| | |
Slew Speed | K | C-K |
Dot Pattern Wide | 1 | 1 or 2 |
Dot Pattern High | 1 | 1 to 3 |
Label Advance | 220 | Form Edge Offset + 20 |
(Back Feed) | | |
Form Edge Offset | 220 | 050 to 999 |
Row Offset | 000 | 000 to 999 |
Column Offset | 000 | 000 to 410 |
Update Count on | 01 | 01 to 99 |
Max. Label Width | 410 | 050 to 410 |
Max. Label Length | 1200 | 0500 to 9999 |
Active Buffers | 1 | 1 or 2 |
Cut By Amount | 0001 | 0001 to 9999 |
Edge/Reflective | E | E or R |
Table 3-2 Print ParametersIf ALT-P parameters are changed while in the create/modify label screen, the changes are saved with the label format. If they are changed in the print label screen, they are not saved and will affect only the current print job. Changing parameters in the print label screen is useful when testing a new label to determine optimum print parameter settings for that particular format.
F7 and ALT-I: This function is used in the create/modify label screen to insert a new field description line between existing field description lines on the screen. It is especially useful when the repeat function is used and other lines on the screen are already below the field to be repeated.
DMX 400/430 Operator’s Manual | 33 |
