Creating Labels Using Internal Batch Software
9.The 4-digit Row Field tells the Printer "how far up" on the label to print the data. The default value is 00.00 and the maximum number cannot exceed the maximum label length set in the print parameters window. Use the bottom left corner as the starting point for row and column.
For the desired vertical placement of your field, enter a number not more than four digits followed by the return key. If the measurement entered is acceptable, the cursor will move to the COL position. If the measurement selected is too large for the given space or the capability of the Printer, the ‘Number Out Of Range’ message will appear.
Data will need to be re-entered. When specifying measurements, always measure to the bottom of the field. For example, if using font 6, the measurement will be to the bottom of the alphanumeric letters. If using a bar code, the measurement will be to the bottom of the bar code’s human-readable line. If the bar code being printed does not have a human-readable line, measure to the bottom of the bars.
When rotating a bar code or alphanumeric field, the row measurement is specified as the amount of space from the starting point of the label to the top of the field.
10.The 4-digit column number tells the Printer ‘how far over’ from the left edge of the label that data is to be printed. Enter a number no longer than four digits in this field, then press the return key. If the measurement is acceptable, the cursor will move to the type position. If the measurement is too large for the given space or the capability of the Printer, the ‘Number Out of Range’ error message will appear and data will need to be re- entered. The cursor will then move to the type position.
42 | DMX 400/430 Operator’s Manual |
