Installing the Stand
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non- uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition.
The monitor uses the HP Quick Release 2 for easy mounting and unmounting of the monitor panel. To mount the panel onto the stand:
1.Lay the monitor panel face down on a flat surface covered by a clean, dry cloth.
2.Slide the top of the mounting plate (1) on the stand under the upper lip of the recess in the back of the panel.
3.Lower the bottom of the stand's mounting plate (2) into the recess until it snaps into place.
4.The HP Quick Release 2 latch (3) pops up when the stand is locked in place.
NOTE: If you are mounting the monitor to a mounting fixture instead of the stand refer to Mounting the Monitor on page 19
6 Chapter 3 Setting Up the Monitor
