HP dx2310 manual Computer Setup Continued, Heading, Option, Description, continued

Setup Utilities and Diagnostics Features

Computer Setup (Continued)

Heading	Option	Description
PnP/PCI	Resources Controlled By	Allows you to select whether resources are
Configurations		controlled automatically or manually:
(continued)		• Auto (ESCD–Extended Storage Configuration
		Data)
		• Manual
		BIOS can automatically configure all the
		bootable and Plug-and-Play-compatible
		devices. If you choose Auto, you cannot
		select IRQ, DMA and memory base address
		fields since BIOS automatically assigns them.
	IRQ Resources	When resources are controlled manually,
	• IRQ-3 assigned to	allows you to assign each system interrupt a
	• IRQ-4 assigned to	type, depending on the type of device using
		the interrupt.
	• IRQ-5 assigned to
		Legacy ISA for devices compliant with the
	• IRQ-7 assigned to
		original PC AT bus specification, PCI/ISA
	• IRQ-9 assigned to
		PnP for devices compliant with the Plug-and-
	• IRQ-10 assigned to
		Play standard whether designed for PCI or
	• IRQ-11assigned to	ISA bus architecture.
	• IRQ-12 assigned to
	• IRQ-14 assigned to
	• IRQ-15 assigned to
Hardware	CPU Fan Speed	(view only)
Monitor Setup
	System Temperature	(view only)
	System Fan Speed	(view only)
	CPU Fan Fault Detect	Disables/enables detection of CPU failure
		during POST.
	SYS Fan Fault Detect	Disables/enables detection of Fan failure
		during POST.
Load Defaults		Allows you to reset Computer Setup to
Setting		factory defaults.
Set Supervisor		Allows you to establish a password to control
Password		access to Computer Setup.
Set User		Allows you to establish a password to control
Password		access to the computer.
Save Setting		Allows you to save current settings and exit
and Exit		Computer Setup.
Exit Without		Allows you to exit Computer Setup without
Saving		saving changes.

✎Support for specific Computer Setup options may vary depending on the hardware configuration.

2–12 490778-001 Service Reference Guide