HP dx2310 manual POST Error Messages, If POST detects an error, If the system cannot boot

POST Error Messages

POST Error Messages

Screen Message	Probable Cause	Recommended Action
Keyboard error or no	Cannot initialize the	Make sure the keyboard is attached
keyboard present	keyboard.	correctly and no keys are pressed during
		POST. To purposely configure the system
		without a keyboard, set the error halt
		condition in Setup to HALT ON ALL, BUT
		KEYBOARD. The BIOS then ignores the
		missing keyboard during POST.
Memory Test:	This message displays	No action request
	during a full memory test,
	counting down the
	memory areas being
	tested.

Memory test fail	If POST detects an error
	during memory testing,
	additional information
	appears giving specifics
	about the type and
	location of the memory
	error.

Reseat memory modules. Replace memory modules.

Override enabled -	If the system cannot boot
Defaults loaded	using the current CMOS
	configuration, the BIOS
	can override the current
	configuration with a set of
	BIOS defaults designed
	for the most stable,
	minimal-performance
	system operations.

Restart the computer, use the F10 Key to access Computer Setup. Select Load Default Settings > Save and Exit.

C–2 490778-001 Service Reference Guide