HP dx2310 manual Front I/O Panel Housing Assembly - MT chassis

Removal and Replacement Procedures— Microtower (MT) Chassis

6.8Front I/O Panel Housing Assembly - MT chassis

1.Prepare the computer for disassembly (Section 6.1, “Preparation for Disassembly”).

2.Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.1, “Preparation for Disassembly”).

3.Disconnect two attaching cables from the system board: the power switch/LED cable, and the front USB cable.

4.Remove the two screws 1 that secure the housing to the chassis and then pull the housing 2 away from the chassis.

1

2

1

To install the housing assembly, reverse the removal procedures.

Service Reference Guide 490778-001 6–17