HP dx2310 manual Computer Setup Continued, Heading, Option, Description

		Setup Utilities and Diagnostics Features
Computer Setup (Continued)
Heading	Option	Description
Power	HPET Support	Disable/ enable HPET feature, only can be
Management		visible for Vista OS.
Setup
	HPET Mode	32 bit mode/64 bit mode. View only, and
		only can be visible for Vista OS.
	WDRT Support	Disable/ enable WDRT feature, only can be
		visible for Vista OS.
	WDRT Run/Stop	Run/Stop. View only, and only can be visible
		for Vista OS.
	WDRT Count	1023. View only, and only can be visible for
		Vista OS.
	ACPI Function	Enables/disables ACPI functions. Changing
		this item can make the existing OS unusable.
	ACPI Suspend Type	Allows you to set type of ACPI suspend to:
		• S1 (POS)
		• S3 (STR)
	Restore On AC/Power Loss	Allows you to select system power loss
		behavior:
		• On
		• Off
		• Last State
	PCI-E Wake on PME	Disable/ enable PCI-E wake up function
	Resume On PME	Disables/enables Resume by PME.
	Wake On Ring	Disables/enables Resume on Ring.
	Resume On Alarm	Disables/enables RTC alarm.
	Date (of Month) Alarm	If Resume by Alarm is enabled, allows you to
		select the day of the month for resumption of
		RTC alarm.
	Time (hh:mm:ss) Alarm	If Resume by Alarm is enabled, allows you to
		select what time the RTC alarm will resume.
PnP/PCI	Reset Configuration Data	Disables/enables automatic reconfiguration.
Configurations		The default is Disabled. Select Enabled to
		reset Extended System Configuration Data
		(ESCD) when you exit Setup, if you have
		installed a new add-on and the system

reconfiguration has caused such a serious conflict that the OS cannot boot.

✎Support for specific Computer Setup options may vary depending on the hardware configuration.

Service Reference Guide 490778-001 2–11