HP Embedded Firewall manual Configuration Methods, Method Description Requirements

Configuration Methods

Configuration Methods

The NIC can be configured using any of the methods listed in the table below.

NOTE: This section describes how to configure the NIC using the 3Com NIC Diagnostics program for Windows. For instructions on using the other two methods, see the file or section mentioned in the table.

Method	Description		Requirement(s)
3Com NIC Diagnostics	Configure the NIC locally using the 3Com NIC		Windows 2003,
Program for Windows	Diagnostics program for Windows:		Windows XP,
	1	Make sure that the 3Com NIC diagnostics
			Windows 2000,
		program is installed. See “Installing the 3Com	Windows NT 4.0,
		NIC Diagnostics Program” on page 46 for
			or
		installation instructions. See “Using the 3Com
		NIC Diagnostics Program” on page 47 for usage	Windows 98 SE
		instructions.
	2	Open the Windows Start menu.
	3	Select Programs, and then 3Com NIC Utilities.
	4	Click 3Com NIC Doctor.
3Com Configuration	Configure the NIC locally using the 3Com		DOS or NetWare
and Diagnostics	Configuration and Diagnostics program for DOS:
program for DOS	1	Copy 3c99xcfg.exe from the 3Com Installation
		CD to the root directory of a DOS-bootable
		diskette.
	2	Reboot the computer using the DOS-bootable
		diskette.
	3	Enter at the DOS prompt:
		a:\3c99xcfg.exe

See “Using the 3Com DOS Configuration Program” on page 48 for more information.

Customers running Japanese DOS must switch to U.S. mode DOS before running this program.

DMI 2.0 or 2.0s	Configure the NIC remotely using the 3Com DMI
	Agent software.
	See “Installing the 3Com DMI Agent” on page 72
	for more information.

3Com DMI Agent and a DMI- compatible browser or a network management application that supports DMI 2.0 or 2.0s

Windows Property	Configure the NIC locally as described in	Windows 2003,
Settings	“Changing Windows 2003, Windows XP, and	Windows XP, or
	Windows 2000 Property Settings” on page 40.	Windows 2000

45