HP Embedded Firewall manual Running the Network Test, Running the NIC Test, Click Perform NIC Test

Running the Network Test

Running the Network Test

Run the Network Test to check the NIC connectivity to the network. To successfully pass the Network Connectivity test, at least one of the following conditions must be met:

•A Windows client running on the same network. This client must have a successfully installed Windows diagnostics program that is currently not running.

•A NetWare server running on the same network.

•A DHCP server running on the same network.

•A DNS server running on the same network with TCP/IP properties configured for the DNS server.

To run the Network test:

1On the Diagnostics screen, click Run Network Test. The Network Connectivity Test screen appears.

2Click Start.

If the test passes, the NIC connection to the network is functioning correctly.

3Click Close.

If the test fails, make sure that the:

•NIC is properly connected to the network cable.

•Hub or switch to which the NIC is connected is powered on.

•Cable complies with the proper length and specifications for your network.

Running the NIC Test

Run the NIC Test to check the physical components, connectors, and circuitry on the NIC.

1On the Diagnostics screen, click Run NIC Test. The NIC Test screen appears.

2Click Perform NIC Test.

While the test is running, a progress bar indicates test progress.

•If the test passes, the NIC is functioning correctly.

•If the test fails, a message indicates the error type. Click Help in the error message screen to obtain more information.

3Click Close.

63