9. Removing Misfed Paper
Removing Misfed Paper
An error message appears if a paper misfeed occurs. The error message gives the location of the misfeed.
RCAUTION:
•The inside of the machine becomes very hot. Do not touch the parts with a “v” label (means hot surface). Touching a part with a “v” label (means hot surface) could result in a burn.
RCAUTION:
•When pulling the paper tray out, be careful not to pull it strongly. If you do, the tray might fall and cause an injury.
Important
❒Misfed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
❒Toner on prints made after removing misfed paper may be loose (inadequate- ly fused). Make a few test prints until smudges no longer appear.
❒Do not forcefully remove misfed paper, it will tear. Torn pieces remaining in- side the printer will cause further misfeeds and possibly damage the printer.
❒More than one misfed area might be indicated. In this case, check every ap- plicable area. See the following charts shown in the illustration.
DC
B Z A
Y U
R
AQV050S
❒If paper continues to misfeed, check the following points.
•Confirm that the setting of the paper size dial matches the size and feed di- rection of the paper loaded in the paper tray.
•Confirm that the toner cartridge is set correctly.
❒If paper misfeeds still occur, contact your sales or service representative.
❒Do not leave any torn paper scraps within the printer.
117