HP LP145N, MLP145, P7245 Types of Paper and Other Media, Plain Paper, Letterhead, Thick Paper, per], Menu, Paper], [Paper Input], Click [Thick] in the [Paper type:] list

Paper and Other Media

Types of Paper and Other Media

Plain Paper

	Paper thickness	60 - 90.2 g/m2 (16 - 24 lb.)
	Printer setup	Press the {Menu} key, select [Paper Input] , and then select [Plain Pa-
		per] for the selected tray's paper type.
	Printer driver setup	Click [Plain] or [Plain/Recycled] in the [Paper type:] list.
	Enabled paper feeding tray	Any input tray can be used.
	Number of sheets that can	• Tray 1, Tray 2: 550
	be set	• Tray 3, Tray 4 (Paper Feed Unit PB 3020): 550
		• Bypass Tray: 50
		• Large Capacity Tray (Large Capacity Tray RT45): 1,500
		Make sure paper is not stacked higher than the upper limit mark
5
		(T) inside the tray.
		Make sure paper is not stacked higher than the paper guides in-
		side the bypass tray.
	Duplex printing	Possible
	Letterhead
	Printer setup		• Press the {Menu} key, select [Paper Input],
			and then select [Letterhead] for the selected
			tray's paper type.
	Printer driver setup		Select [Letterhead] in the [Paper type:] list.
	Duplex Printing		Possible
	Thick Paper
	Paper thickness	91 - 163 g/m2 (24 - 43.5 lb.)
		(Only for the bypass tray)
	Printer setup	Make the following settings using the control panel:
		• Press the {Menu}key, select [Paper Input] , and then select [Thick
		Paper] for the bypass tray's paper type.
	Printer driver setup	Click [Thick] in the [Paper type:] list.
	Enabled paper feeding tray	Only the bypass tray can be used.
		Note
		❒ Make sure paper is not stacked higher than the paper guides
		inside the bypass tray.
	Duplex printing	Not possible
68	Additional cautions	Print speed is slightly slower than when using plain paper.