Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module)

Attaching Memory Unit Type D 128MB,

Memory Unit Type E 256MB (SDRAM

Module)

RCAUTION:

• Do not touch the inside of the controller board compartment. Doing so may

 

2

cause a malfunction or a burn.

 

 

 

 

 

Important

❒Be sure to install SDRAM modules after installing the hard disk drive.

❒Before touching the memory unit, ground yourself by touching something metal to discharge any static electricity. Static electricity can damage the memory unit.

❒Do not subject the memory unit to physical shocks.

❒Available memory varies depending on a model type.

❒Before using the new memory unit, Be sure to make settings in the printer driver.

A Turn off the printer.

B Pull out the first paper tray (Tray 1) and take the screwdriver (1) from the tray. Each screw to be removed requires this screwdriver.

AQV222S

27