HP LP145N, MLP145, P7245 Setting SSID, Enter, [Auto], [SSID], Reference, [Enter ID], [Comm. Mode], [Trans. Speed], [IEEE 802.11b], [802.11 Ad hoc], [Infrastructure]

IEEE 802.11b (Wireless LAN) Configuration

H Enter the channel using {T} or {U}, and then press the {qEnter} key.I Set [Trans. Speed] in the same way.

The factory default is [Auto]. If you need to change the transmitting speed depending on environment you are using, select the appropriate transmitting speed.

J Print a configuration page to confirm the settings made.

Reference 4

For details about printing the configuration page, see “Printing the Test Page”, Quick Installation Guide.

Setting SSID

If [Infrastructure] or [802.11 Ad hoc] is selected for [Comm. Mode], set SSID to use for transmission.

Confirm the network administrator for SSID to use.

A In the [IEEE 802.11b] menu, select [SSID] using {T}or {U}, and then press the {qEnter} key.

If an SSID has been set, you can check the SSID setting.

B select [Enter ID] using {T} or {U}, and then press the {qEnter} key.C Enter characters using {T} or {U}, and then press the {qEnter} key.

The number of character you have entered is displayed on the top right of the screen.
The characters that can be used are ASCII 0x20-0x7e (32 bytes), 16 digits.	59