HP LP145N, MLP145, P7245 Setting a WEP key, Enter, [WEP], Reference, {qEnter} key, [IEEE 802.11b], [Change (HEX)], [Change (ASCII)], [Security Method]

Configuration

D Print a configuration page to confirm the settings made.

Reference

SSID can also be set using a Web browser. For details, see the Web Image Monitor Help, and “Configuring the Network Interface Board Using Web Browser”, Software Guide.

WEP key can also be set using a Web browser. For details, see Web Image Monitor Help.

For details about printing the configuration page, see “Printing the Test Page”, Quick Installation Guide.

	Setting a WEP key
	In the case of using a WEP key on a network, activate the WEP setting to be used
4
	for communication along with WEP.

Confirm the network administrator for the WEP Key to use.

A In the [IEEE 802.11b] menu, select [Security Method] using {T}or {U}, and then press the {qEnter} key.

B Select [WEP] using {T} or {U}, and then press the {qEnter} key.

When activating the WEP Setting, you will need to enter the WEP key. If you have not entered the key, be sure to enter it.

C Select [Change (HEX)] or [Change (ASCII)] using {T}or {U}, and then press the{qEnter} key.

60