HP LP145N, MLP145, P7245 K Fasten all the screws which you removed in step C

Installing Options

I When replacing the default SDRAM module, press down the levers on both sides () to remove the default module ().

2

AQV763S

Install a new SDRAM module.

To increase memory capacity to the maximum of 512 MB, remove the default SDRAM module, and then install two 256 MB SDRAM modules.

J Store the controller board (1) into the printer while gently pressing the cover (2).

AQV502S

Push in the controller board firmly to align the rails in the printer's compart- ment.

K Fasten all the screws which you removed in step C.

AQV503S

The printer may malfunction if the controller board is not properly installed.

30