HP LP145N, MLP145, P7245 manual 42

Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module)

Note

❒Be sure to return the provided screwdriver to its original position on the inside of the front cover.

❒After finishing the installation, you can check the memory unit is properly installed: Print the configuration page from the [List/Test Print] menu. If it is installed properly, the memory capacity will appear under “Total Memo- ry” on the configuration page.

❒ The table below shows the total SDRAM module capacities.				2
	Standard	Extended	Total
	128 MB	128 MB	256 MB
	128 MB	256 MB	384 MB
	256 MB	128 MB	384 MB
	256 MB	256 MB	512 MB

❒If the memory unit is not properly installed, repeat this procedure. If you cannot install it properly even after reinstallation, contact your sales or service representative.

❒Install the controller board carefully to prevent any malfunction.

Reference

For printing the configuration page, see “Printing the Test Page”, Quick Installation Guide.

31