ORA_CRS_HOME=/app/Oracle/crs # . This attribute is needed only when this toolkit is used in an SGeRAC cluster.
INSTANCE_TYPE=database
ORACLE_HOME=/ORACLE_TEST0
ORACLE_ADMIN=Oracle
SID_NAME=ORACLE_TEST0
ASM=yes
ASM_DISKGROUP[0]=asm_dg1
ASM_DISKGROUP[1]=asm_dg2
ASM_VOLUME_GROUP[0]=vgora_asm1
ASM_VOLUME_GROUP[1]=vgora_asm2
ASM_HOME=/ASM_TEST0
ASM_USER=Oracle
ASM_SID=+ASM
LISTENER=yes
LISTENER_NAME=LSNR_TEST0
LISTENER_PASS=
PFILE=${ORACLE_HOME}/dbs/init${SID_NAME}.ora
MONITOR_PROCESSES[0]=ora_pmon_${SID_NAME}
MONITOR_PROCESSES[1]=ora_dbw0_${SID_NAME}
MONITOR_PROCESSES[2]=ora_ckpt_${SID_NAME}
MONITOR_PROCESSES[3]=ora_smon_${SID_NAME}
MONITOR_PROCESSES[4]=ora_lgwr_${SID_NAME}
MONITOR_PROCESSES[5]=ora_reco_${SID_NAME}
MONITOR_PROCESSES[6]=ora_rbal_${SID_NAME}
MONITOR_PROCESSES[7]=ora_asmb_${SID_NAME}
MAINTENANCE_FLAG=yes
MONITOR_INTERVAL=30
TIME_OUT=30
KILL_ASM_FOREGROUNDS=yes
PARENT_ENVIRONMENT=yes
CLEANUP_BEFORE_STARTUP=no
USER_SHUTDOWN_MODE=abort
OC_TKIT_DIR=/etc/cmcluster/crs # This attribute is needed only when this toolkit is used in an SGeRAC cluster.
Generate the database package configuration file and the control script in the database package directory. Then edit the parameters of these files as mentioned for the database package.
#cmmakepkg
#cmmakepkg
Edit the package configuration file db1pkg.conf as shown below:
PACKAGE_NAME - Set to any name desired.
PACKAGE_TYPE - Set to FAILOVER.
RUN_SCRIPT /etc/cmcluster/db1_package/db1pkg.cntl
HALT_SCRIPT /etc/cmcluster/db1_package/db1pkg.cntl
DEPENDENCY_NAME asm_dependency
DEPENDENDY_CONDITION <ASM MNP PACKAGE_NAME>=UP
DEPENDENCY_LOCATION SAME_NODE
If SGeRAC packages are configured in the same cluster, then the ASM MNP package should not be created and the Oracle database package should depend on the SGeRAC Clusterware package instead of the ASM MNP. In this case, use the definition below instead of the one above this paragraph:
DEPENDENCY_NAME asm_dependency
DEPENDENDY_CONDITION <SGeRAC OC MNP PACKAGE_NAME>=UP
DEPENDENCY_LOCATION SAME_NODE
