HP Serviceguard Toolkit for Oracle Data Guard manual ORACLEADMIN, SIDNAME, LISTENER, Listenername

•Edit the configuration file haoracle.conf in the package directory. Leave the INSTANCE_TYPE to the default value "database". Configure values for all parameters that were present in the older toolkit configuration file, that is, ORACLE_HOME,

ORACLE_ADMIN, SID_NAME, LISTENER, LISTENER_NAME,

LISTENER_PASSWORD, PFILE, MONITORED_PROCESSES, MAINTENANCE_FLAG, MONITOR_INTERVAL, TIME_OUT. Leave the value of ASM to the default value "no". The new parameters can be left as they are by default.

•Copy all the scripts from the package directory from this node to all the configured nodes.

•Start the database package. There is no need to re-apply the package configuration since no changes are being made to the package ASCII file.

2.Migration to a legacy database package using ASM:

•Halt the database package.

•Configure ASM on all the configured nodes as mentioned in this document. Create ASM disk groups, configure the raw logical volumes and make the database instance use the ASM storage. Steps to migrate a database to ASM can be found in Oracle manuals.

•Configure an ASM MNP as mentioned in this document.

•Apply the ASM MNP configuration.

•Run the ASM MNP.

•Copy the framework scripts provided in the bundle to the database instance package directory.

•Configure the configuration file haoracle.conf file as mentioned in this document for the database package.

•Create a new package ASCII file and control script or edit the existing package ASCII and control scripts in the database package directory. Configure the parameters as mentioned for the database package.

•Copy the scripts from the package directory to all the configured nodes.

•Remove the older database package configuration if a new package for the database instance is being configured.

•Apply the database package configuration.

•Run the database package.

3.Migration to a modular database package not using ASM:

•Halt the database package.

•In case of configuration directory mode of operation to be used, copy the new Oracle scripts to another package directory.

•Migrate the older legacy package to a modular package containing Serviceguard parameters.

# cmmigratepkg -p <legacy_pkg_name> -s -o <modular_pkg_name>

Refer to the Whitepaper "Migrating Packages from Legacy to Modular Style, October 2007" and also the Whitepaper Modular package support in Serviceguard for Linux and ECM Toolkits available at http://www.hp.com/go/hpux-serviceguard-docs —>HP Serviceguard Enterprise Cluster Master Toolkit

•To add the values to this modular package configuration file, from the older toolkit configuration file, issue the following command:

# cmmakepkg -i modular.ascii -m ecmt/Oracle/Oracle -t <older toolkit configuration file> modular1.ascii

48 Using the Oracle Toolkit in an HP Serviceguard Cluster