![](/images/new-backgrounds/1319798/319798251x1.webp)
3PAR Recovery Manager 4.1.0 For Microsoft Exchange 2010 User’s Guide
Table
Event ID | Error Message | Description/Action |
|
|
|
5167 | RME5167: ERROR: One of the | A Virtual Copy creation could |
| databases in the Mailbox | not be completed due to a |
| Database may be | possible database dismount in |
| dismounted, cannot continue | the associated Mailbox |
| with Virtual Copy creation. | Database. |
|
| ■ Mount all the databases in a |
|
| Mailbox Database and try to |
|
| create the virtual copy. |
|
|
|
3173 | RME3173: ERROR: The Virtual | The specified virtual copy |
| Copy is not found in the | could not be located in the |
| repository, check if | repository. |
| parameters are correct. | ■ Check the syntax for the |
|
| RMExch backup command. |
|
|
|
3176 | RME3176: ERROR: Verification |
| has encountered an error. |
Please run Validate command on this snapshot.
A verification error for the snapshot operation has occurred.
■Run RMExch validate to verify that the snapshot was created.
3198 | RME3198: ERROR: Backup |
| error occurred. Check to see if |
| your policy name is correct. |
An error has occurred during the backup.
■Check the RMExch backup command parameters to ensure that the correct policy name is used.
C.16
Description of Events