HP StoreServ Application Suite for Microsoft Exchange Media manual Example

3PAR Recovery Manager 4.1.0 For Microsoft Exchange 2010 User’s Guide

◆-defer- Optional. To defer the Exchange log truncation after the successful backup is confirmed in automatic creation. This cannot be used with the -toption.

NOTE: The -deferoption is not supported when the Recovery Manager for

Exchange backup server is the same as the production server.

NOTE: The -deferoption defers log truncation until backup completion. This keeps the Exchange writer in the “waiting for completion” state for that period.

◆-mp "mountpoint" - Optional. Specifies the mount point (delimited by quotation marks), for a backup location other than in the default directory.

◆Full path is required.

◆Default is '<System Drive>:\3parsnapshot'.

◆If the specified virtual copy is already mounted, this parameter will be ignored.

NOTE: Use quotes ("") where spaces are included.

NOTE: Symantec NetBackup software is case sensitive. Make sure all information entered pertaining to the policy is supplied with the proper case.

EXAMPLE

The following command will perform a backup of virtual copy 020405162103 whose data has currently been mounted on the server S1.

RMExch backup -mdb mailboxdatbase -t 020405162103 -vs S1 -p test -d full -m bottlenosed

7.6

Recovery Manager Commands