HP sv6 manual Document purpose, Section descriptions

installation and user information

document purpose

document purpose

The purpose of this document is to provide information on installing, customizing and using hp visualization center sv6 systems. Because the workstations will arrive racked, pre-cabled and pre-configured, minimal information about hardware setup is included in this document. Sections of this document provide steps for setting up and configuring systems. There are also sections that provide instructions on how to use hp visualization center sv6-specific tools. Refer to the Glossary for definitions of terms used in this document.

See the following documents for additional information:

•hp visualization center sv6 Site Prep Guide for cooling, space and power requirements, etc.

•hp visualization center sv6 Troubleshooting Guide - see http://www.hp.com/go/workstationsupport for tips on how to resolve problems you may encounter during the initial setup and customization.

•hp disk system ds2100 - see http://www.hp.com/products1/storage/disk_arrays/disksystems/ds 2100/supplies/index.html

•/etc/X11/X0screens for X server configuration details or

/usr/lib/X11/Xserver/misc/slsd/templates/ for hp visualization center sv6 X0screens templates.

•/usr/lib/X11/Xserver/info/screens/hp for non- hp visualization center sv6 X server configuration details.

•/opt/graphics/OpenGL/sv/doc/README.* for details about hp visualization center sv6 tools.

section descriptions

•Product Overview - Provides a general hardware and software architecture overview.

•Installation - Steps that the hp visualization center sv6 installer will help you accomplish.

20 Chapter 2