file configuration

#The form for each entry is:

#<internet address> <official hostname> <aliases>

#For example:

#192.1.2.34 hpfcrm loghost

#See the hosts(4) manual page for more information.

#Note: The entries cannot be preceded by a space.

#DNS Server (optional)

 

15.6.180.221

dsnx.my.site

dsnx

15.1.170.0

myvis

#10/100 Ip8 hostname

127.0.0.1

localhost

loopback

#sv6 10/100 LAN host information

#Automatically generated, customize for your site.

15.1.170.1

sv1x

sv1x

15.1.170.2

sv2x

sv2x

15.1.170.3

sv3x

sv3x

 

.

 

 

.

 

 

.

 

15.1.170.8

sv8x

sv8x

#sv6 Gigbit host information

# Do not change

192.168.1.1 svm

192.168.1.2 sv1

192.168.1.3 sv2

192.168.1.4 sv3

192.168.1.5 sv4

192.168.1.6 sv5

192.168.1.7 sv6

192.168.1.8 sv7

192.168.1.9 sv8

/etc/rc.config.d/netconf - On all systems, the lan1 section specifies the IP address that corresponds with the HP ProCurve Gigabit Ethernet module (J4115B) that was assigned in the /etc/hosts file. The lan0 section and hostname specify the 10/100 LAN information.

#/etc/rc.config.d/netconf

# netconf: configuration values for core networking subsystems

HOSTNAME=”svm”

OPERATING_SYSTEM=HP-UX

LOOPBACK_ADRESS=127.0.0.1

Chapter 3

89

Page 89
Image 89
HP sv6 manual OPERATINGSYSTEM=HP-UX LOOPBACKADRESS=127.0.0.1