HP sv6 manual Examples

installation and user information

how to use hp visualization center sv6 tools

The setpipes program modifies the location and size of the rendering area for each 3D Slave. In addition, the number of jitter samples per 3D Slave can also be specified.

NOTES:1) When experimenting with different values in xdist and ydist, it is possible that the values will not total 100% of the screen width or height. In this case, the command will be executed and the compositor will display a test pattern in the areas not covered by a pipe. The test pattern is a block grid pattern that rotates between red, green, and blue continuously.

2)When running setpipes on an sv6 VisCenter configuration, the "-" is optional between the master specifier (e.g, "-0") and the Pipe orientation (e.g., grid). In other words, on an sv6 VisCenter:

setpipes -0 grid -1 grid

is identical to

setpipes -0 -grid -1 -grid

EXAMPLES

1)sv6 Configuration: 8-Pipe System, Horizontal Stripes setpipes -h

+---------------+

---------------
---------------
---------------
---------------
---------------
---------------
---------------
+---------------	+

2)sv6 Configuration: 8-Pipe System, Grid setpipes -grid

+---	+---	+---	+---	+
+---	+---	+---	+---	+
+---	+---	+---	+---	+

68 Chapter 2