Figure 38 NETWORK CONFIGURATION with no DHCP
If a DHCP server is found, the NETWORK CONFIGURATION screen will contain the client's hostname and IP address. If there is networking configuration information on the server, the parameters regarding contacting the server will be
Set the NETWORK CONFIGURATION parameters so the client system can contact the
The server will then be contacted for its installation configuration information for the client. (A dialog box will be displayed on the server with information that this client was found.) The client configuration information is then displayed in the terminal user interface (TUI) version of the client installation configuration interface (itool).
NOTE: The NETWORK CONFIGURATION screen has input fields. Typing a shortcut key, such as O for OK, while the cursor is positioned at an input field will result in an O being entered in the field instead of selecting the OK button.
Figure 39 The TUI version of itool
Installing