Figure 78 Network Interface(s) Dialog Box

1.Select an Interface card from the selection list.

2.Select DHCP Managed if you want the selected interface configured using information obtained via DHCP. When this is selected, the IP Address and Subnet Mask fields are not shown.

3.Enter or modify the IP Address: as needed; this is not required with DHCP Managed.

4.Enter or modify the Subnet Mask: as needed; this is not required with DHCP Managed.

5.Select Primary Interface, depending on the status you want for the selected interface. If the client has more than one interface, the Primary Interface will be associated with the hostname of the system in /etc/hosts.

6.Click Modify when you have finished updating each interface.

Security Choices...

Click this button on the System tab to invoke the Security Choices dialog box. This button is available only if you have install-time security available in your configuration. The install-time security choices allow you to choose from several predefined security levels, thereby hardening the system. If you select a security choice, be sure to set the root password before you click Go!, or your system may be vulnerable.

Figure 79 Security Choices dialog box

File System tab

The File System tab enables you to do a variety of file system and disk configuration tasks. Its appearance depends on your file system selection on the Basic tab. The example in Figure 80 illustrates what you would see if you had selected LVM on a PA-RISC client.

Configuring the installation 137