or copied to the server from media via dd(1) and then made available for NFS or FTP access. For example:
RedHat:
SuSE:
/ISOimages/SLES9
/ISOimages/SLES9/ARCHIVES.gz
/ISOimages/SLES9/autorun.inf
/ISOimages/SLES9/boot
/ISOimages/SLES9/boot/directory.yast
/ISOimages/SLES9/boot/image
/ISOimages/SLES9/boot/initdisk.gz
/ISOimages/SLES9/boot/rescue
/ISOimages/SLES9/boot/rescuefloppy
/ISOimages/SLES9/boot/root
/ISOimages/SLES9/boot/ChangeLog
/ISOimages/SLES9/boot/content
/ISOimages/SLES9/boot/control.xml
.
.
.
The information presented here gives some general guidance on Linux installation set up. Specific Linux release information must be consulted for getting boot and install content, setting up content on an installation server, and required options in the EFI boot configuration file.
The /etc/bootptab content to enable Linux boot for installation might look like the following.
linuxsys2:\
ht:=ether:\
ha=001560045A4A:\
ip=10.1.1.221:\
hn:\
sm=255.255.255.0:\
gw=10.1.1.1:\
nt=10.1.1.11:\
ds=10.1.1.11:\
Once all the content has been set up, the
Use EFI network boot to start the boot and installation process.
Installation options specified in the
IMPORTANT: If the message file is missing or incorrect, the system might display a blank screen when elilo boots. If this happens, you must be able to use
Select the desired distribution for boot and installation.
Linux Install from an | \ | |
| ||
This image enables Linux installation from an | ||
menu option, enter kernel options at the prompt if desired, and press |
68 Complex networks: