Figure 49 Client console awaiting server action

Configuring the installation

To begin the installation, select a client by clicking on its icon, and then select one of the following from the Actions menu:

—Install Client->New Install... to install a new client as described in “New installation” (page 116).

—Install Client−> Repeat Install... to use the configuration of a previously installed client as described in “Repeat an installation” (page 145).

Figure 50 Ignite-UX Actions menu

New installation

The new installation procedure follows a linear path until the client installation configuration interface is displayed. At that point, the amount of configuring done is at your discretion.

116 Booting and installing HP-UX on clients using the server