boot content

[WVI]INSTALL [WVI]INSTALLFS INSTCMDS or INSTCMDSIA, config files, and other files

 

to support boot and Ignite-UX functionality needed to switch to another install source.

boot helper media

Installation media with no archive. Meant for booting only. Installation is completed using an

 

Ignite-UX server.

boot helper system

A system with minimal Ignite-UX core functionality on a local subnet that provides an Ignite install

 

kernel to a client to assist it with booting from an Ignite-UX server on another subnet.

boot image

Boot content, including [WVI]INSTALL, [WVI]INSTALLFS, INSTCMDS or INSTCMDSIA, and

 

other content needed to support boot, formatted for a specific media type such as CD, DVD, or

 

tape.

bootsys

An Ignite-UX command that allows you to reboot and install clients that are currently running

 

HP-UX. See bootsys(1M).

bundle

A package of software available from Software Distributor. Bundles are distributed within depots

 

and contain products and filesets. Ignite-UX typically references software at the bundle level, as

 

opposed to product or product.fileset.

C

 

CD boot image

A boot image formatted for a CD.

cDSF

Cluster-wide Device Special File. When servers in a cluster/otherwise share storage, cDSFs are

 

created to ensure that all the servers sharing storage use the same unique cDSFs to access the

 

disk. Character cDSFs reside in /dev/rcdisk and block cDSFs reside in /dev/cdisk directories

 

respectively. There is a one-to-one mapping between agile DSF and cDSF.

 

 

 

NOTE: cDSFs are only unique between systems configured to share cDSFs. Typically cDSFs are

 

setup within a single Serviceguard cluster.

 

 

cfg clause

See configuration clause.

check_net_recovery

An Ignite-UX command that compares the files on a currently running system with a network

 

recovery archive created by make_net_recovery. A report is generated showing those files

 

that have been added, deleted, or changed since the recovery archive was created. See

 

check_net_recovery(1M).

check_tape_recovery

 

An Ignite-UX command that compares the files on a currently running system with a tape recovery

 

archive created by make_tape_recovery. A report is generated showing those files that have

 

been added, deleted, or changed since the recovery archive was created. See

 

check_tape_recovery(1M).

CINDEX

An INDEX file for individual clients, kept in the /var/opt/ignite/client directory on the

 

Ignite-UX server. Used to install recovery images made with make_net_recovery.

client

A computer that uses an Ignite-UX server for installation, recovery services, or both.

cloning systems

To replicate one computer’s software and configuration onto another. This can be accomplished

 

to varying degrees using make_sys_image and make_[tapenet]_recovery.

cold install

Booting, loading HP-UX onto, and then starting a system. This process loads a new copy of HP-UX

 

onto a system.

common

System software you want replicated onto other systems, such as: an operating system, patches,

configuration

and application software.

compressed file

A file made smaller with compression software such as gzip or compress without losing any

 

information. See gzip(1) and compress(1).

CONFIG

A file in the LIF volume that typically contains all the software configuration information and the

 

default file system layout information. It includes default configuration information for the operating

 

system release, user-defined configuration information, and information regarding archives and

 

depots.

config file

See configuration file.

configuration

Defines a collection of related configuration files used to install or recover a system. You will find

clause

configuration clauses in the /var/opt/ignite/data/INDEX file for installations, and in the

259