Set Root Password... button on the System tab, and set the DNS information located via the Network Services... button on the System tab.
Figure 53
The Show Summary, Save As, Reset Configuration, Go!, Cancel, and Help buttons are available from all tabs with the same functionality.
Table 8 Functions available from all tabs
Button | Functionality |
|
|
Show Summary | Displays the new installation |
| hardware inventory for the target client. |
|
|
Save As | Saves the configuration for future use. Not available with the TUI. Load saved |
| configurations from the Configurations... button on the Basic tab. |
|
|
Reset Configuration | Populates all GUI fields with default settings. |
|
|
Go! | Starts the installation. You will be asked to confirm before the installation begins. |
|
|
Cancel | Quits the session. |
|
|
Help | Help is available for all GUI fields. Also initiated with the F1 key. |
|
|
Basic tab
The Basic tab, shown in Figure 53, is displayed as default. The elements on this tab are explained in the subsections that follow.
Configurations: list button
Click the selection list button adjacent to Configurations: and select the configuration you want to use for this installation. The configuration options presented are stored on the
If the selected configuration has no corresponding environments, you will get the message shown below. Select another configuration for installation. If you booted the client with an
118 Booting and installing