Figure 87 Repeat Install dialog box

The Configuration File list (Figure 87) is populated by the last installation configuration, and all those that you have created using the Save As...button that is on all of the installation configuration tabs. These saved installation configurations are stored in /var/opt/ignite/saved_cfgs/.

If there are no saved configurations, the Repeat Install action is not available and you must begin a new installation as described in “New installation” (page 116).

Select one of the configurations listed by clicking on it, then click OK. Ignite-UX begins the installation process with a confirmation query to alert you that the clients appearing in the Selected Clients list are about be installed. Confirm or cancel the installation of the listed clients using the appropriate button.

Executing the installation

After selecting Go! to initiate a new installation, and also after confirming a repeat installation, Ignite-UX executes a preinstallation consistency check to identify any errors that must be corrected before the installation occurs (Figure 88).

146 Booting and installing HP-UX on clients using the server