Additional... button
Click Additional... to select among certain preconfigured use models and variables from your current configuration files. The buttons available are determined from the variables in your configuration file and enable you to choose a setting for each variable.
If for example you are using LVM, you will see selections for easily setting up multiple disks, the default LVM version, striping, and file system creation. The default value for the Default root group LVM version... is 1.0.
For more information, see instl_adm(4).
The Verify Signature option enables you to verify the signature of the media or depot during cold installation on 11i v3 Integrity servers.
NOTE: Signature verification is performed during initial cold install phase. This may take a long time. For more information, see Software Distributor Administrator Guide at http://www.hp.com/
Figure 59 Additional Configuration Controls Dialog Box
The example Additional Configuration Controls dialog box below illustrates the options for a different system. Systems with firmware hyperthreading have it enabled by default.
124 Booting and installing