
4.Remove the power connector cable from the base enclosure (6).
Reverse this procedure to install the power connector cable.
System board
NOTE: All system board spare part kits include replacement thermal material.
NOTE: Models that support
Description |
| Spare part number |
|
|
|
System board for use in |
| |
|
|
|
System board for use in models with Windows 8 | Standard | |
|
|
|
System board for use in models with Windows 8 | Professional | |
|
|
|
Before removing the system board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 46).
106 | Chapter 6 Removal and replacement procedures for Authorized Service Provider parts |