5.Remove the service door (see Service door on page 48).
6.Remove the optical drive (see Optical drive on page 57) or upgrade bay hard drive (see Upgrade bay hard drive on page 59).
7.Remove the keyboard (see Keyboard on page 63).
8.Remove the top cover (see Top cover on page 72).
Remove the fingerprint reader:
1.Position the top cover upside down with the front toward you.
2.Remove the Phillips PM2.0×3.0 screw (1) that secures the fingerprint reader bracket to the top cover.
3.Pull the bracket from atop the fingerprint reader board (2).
4.Disengage the cable from adhesive that secures it to top cover (3).
The fingerprint reader bracket is available in the Bracket Kit using spare part number
The fingerprint reader bezel and insert are available in the Plastics Kit using spare part number
5.Lift the fingerprint reader from the top cover (4).
Reverse this procedure to install the fingerprint reader.
Component replacement procedures | 81 |
