ExpressCard assembly
Description | Spare part number |
|
|
ExpressCard assembly | |
|
|
Before removing the ExpressCard assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 46).
5.Remove the service door (see Service door on page 48).
6.Remove the optical drive (see Optical drive on page 57) or upgrade bay hard drive (see Upgrade bay hard drive on page 59).
7.Remove the keyboard (see Keyboard on page 63).
8.Remove the top cover (see Top cover on page 72).
Remove the ExpressCard assembly:
1.Position the computer upright and open as far as possible.
2.Remove the Torx T8M2.5x4.0 screw (1) that secures the light pipe to the computer, and then lift the light pipe from the computer (2).
3.Remove the four Torx T8M2.5x4.0 screws (3) that secure the ExpressCard assembly to the computer.
4.Lift up on the right side of the board to disengage it from the system board connector (4), and then pull the assembly upward and to the right to remove it from the computer (5).
Component replacement procedures | 91 |
