b.Separate the bracket from the hard drive (2).

Reverse this procedure to reassemble and install the hard drive.

Solid-state drive (SSD) – mSATA

Description

Spare part number

 

 

128 GB

737343-001

 

 

32 GB

737342-001

 

 

Before removing the solid-state drive module, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 46).

5.Remove the service door (see Service door on page 48).

Remove the solid-state drive:

1.Remove the two Phillips PM2.0×3.0 screws (1) that secure the drive to the computer.

Component replacement procedures

51