Display panel

Description

Spare part number

 

 

Raw display panel, 43.9 cm (17.3 in), HD+, anti-glare, LED, WVA

735366-001

 

 

Raw display panel, 43.9 cm (17.3 in), FHD, anti-glare, LED, WVA

735367-001

 

 

Before removing the display panel, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 46).

5.Remove the display bezel (see Display bezel on page 67).

Remove the display panel:

1.Remove the six Torx T8M2.5×7.0 screws (1) that secure the panel to the enclosure.

NOTE: If tape secures the panel to the enclosure, lift the tape to disengage the panel from the enclosure.

2.Separate the top of the display panel from the top of the enclosure (2).

70

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts