2.Remove the Torx T8M2.5x4.0 screw that secures the bracket over the RJ-45 connector (2), and then lift the bracket off the connector (3).

The RJ-45 connector bracket is available in the Bracket Kit using spare part number 737734-001. The right rear plastic cover is available in the Plastics Kit using spare part number 733637-001.

3.Disconnect the power connector cable (1) and the speaker cable (2) from the system board.

4.Remove the six Torx T8M2.5x4.0 screws (marked with a triangle icon) (3) that secure the system board to the base enclosure .

108

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts