Recording and Playback

The Recording feature records active sonar information. When the recording is played back, the v iews that were active during the record ing are available in Playback. The Recording and Playback feature is available when an optional- purchase MMC/ SD card is inst alled an d Scr een Snap shot is On (see Setup Menu Tab, Screen Snapshot). Saved Recordings can be played back from the Snapshot and Recording View.

Start a Recording

From Snapshot and Recording View, select Start Recording from the X-PressMenu.

Slider Bar

Notes about Recording:

Start recording:

1. From the Snapshot and Recording View, press the MENU key once t o o pen the Snap shot and Recording X-PressMenu.

2.Highlight Start Recording, a nd press the R IGHT Cu rsor key. A waypoint will also be created at the boat location, and the recording s hares the same file name (.SON).

Stop recording:

1.In any view, press the MENU key once to open the Snapshot and Recording X-Press™ Menu.

2.Highlight St op Recording a nd press the RIGHT Cursor key.

While recording, press the EXIT key to exit the Snapshot and Recording X-Press™ Menu and scroll to a different view. Recording will continue.

The slider bar at the bottom of the Snapshot and Recording View shows the recording progress and remaining space on the MMC/SD card.

Pings Per Sec ond: For maximum p erformance, keep th e Pings Per Second setting on Auto (see Snapshot and Recording X-PressMenu).

Viewing s aved Screen Snapshot s a nd Rec ording Pl ayback are not available while in recording mode.

Views

22

Page 32
Image 32
Humminbird 365i manual Recording and Playback