Humminbird Complete Guide to Setting and Clearing Map Offset for Your Fish Finder

Set Map Offset

(Advanced)

Settings: Follow screen instructions to activate.

Set Map Offset allows you to change the map offset used by your Fishfinder. Press the 4-WAY Cursor Control key t o activate the cursor and m ove it to the location where the Map Off set will be a pplied. Then, confirm the map offset position using the Set Map Offset menu setting.

The Map Offset will be applied to all map s and not just the map that requires the correction. The Map Offset should be cleared if a different map is to be used.

NOTE: The cursor must be active in order for this procedure to work.If the cursor was not active before you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.

Clear Map Offset

(Advanced)

Settings: Follow screen instructions to activate.

Clear Map Offset allows you t o clear t he Map Offset . The Clear Map Offset menu option is available when Map Offset is active.

Chart Menu Tab 94