Clear Current Track, Save Current Route | Humminbird 365i instruction

Clear Current Track

Settings: Follow screen instructions to activate.

Clear Current Track allows you t o clear the current track on the display and start a new track at the present position.

Save Current Route

(only when Navigating)

Settings: Follow screen instructions to activate.

Save Current Route allows you to save the current route being displayed. This menu option will only appear when you are currently navigating a route.

Skip Next Waypoint

(only when Navigating)

Settings: Follow screen instructions to activate.

Skip Next Waypoint removes the next waypoint from the cur rent route. This menu option will only appear when you are currently navigating a route.

Cancel Navigation

(only when Navigating)

Settings: Follow screen instructions to activate.

Cancel Navigation discards the current route and exits Navigation Mode. This menu option will only appear when you are currently navigating a route. This will not delete a previously-saved route.

Remove Target

(only if a Target is Active)

Settings: Press the RIGHT Cursor key to activate.

Remove Target removes the waypoint target from the display. This menu option will only appear when a target has already been applied to a waypoint.

NOTE: See Introduction to Navigation: Add a Waypoint Target or Troling Grid for more information.

Navigation X-Press™ Menu

66

Image 76

Humminbird 365i manual Clear Current Track, Save Current Route, Skip Next Waypoint, Remove Target

Contents

365i Combo Operations Manual Thank You Which your product was purchased Table of Contents What’s on the 300 Series Control Head Key Functions Press Menu Main Menu Sonar Menu Tab Chart Menu Tab Setup Menu Tab Views Menu Tab Power On the Unit How Sonar Works Peak to Peak measures power output at the highest points DualBeam Plus Sonar How GPS Works What’s on the Sonar Display Bait Ball RTS Real Time Sonar Window Understanding the Sonar Display SwitchFire Bottom Presentation What’s on the Sonar Display Views Sonar views Views Setup Menu Tab Select Readouts Sonar View Sonar Zoom View 200/83 kHz Split Sonar View Big Digits View Big Digits View Circular Flasher View Snapshot and Recording View Snapshot and Recording View Screen Snapshots Active cursor Recording and Playback Down To save a Scree n Snap shot r active cursor location y ou Bird’s Eye View Bird’s Eye View Chart View Views Chart/Sonar Combo View View Orientation Views Views Introduction to Navigation Waypoints, Routes, and Tracks Waypoints, Routes, and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Waypoint Map Scale Add a Waypoint Target or Trolling Grid Save, Edit, or Delete a Route Save or Clear a Current Track Edit, Delete, or Hide Saved Tracks Add Maps to Your Fishfinder To insert an MMC/SD card Remove the MMC/SD slot cover Export Navigation Data What’s on the 300 Series Control Head POWER/LIGHT Key Key Functions Info Key View KeyMenu Key WAY Cursor Control Key Goto Key Mark KeyZoom +/- Key Exit Key Multi-Media Card MMC/SD Slot Menu System Start-Up Options Menu Normal Simulator Start-Up Options Menu GPS Diagnostic View Press Menu Main Menu Press the Exit key to move quicklyto the top of the tab Quick Tips for the Main Menu User Mode Normal or Advanced Sonar Tab, Normal Mode Sonar Tab, Advanced Mode Sonar X-Press Menu Sonar Views only Settings Low = 1, High = 20 Default = Sensitivity Upper Range Models only Default = AutoLower Range Chart Speed Fastest Default =Black Default = Inverse Bottom View Cancel Navigation Settings Off, On Default = OffSettings Follow screen instructions to activate Bottom Lock Navigation X-Press Menu Settings Edit, Delete, Target, Grid Waypoint NameCursor to Waypoint Save Current Track Clear Current Track Save Current RouteSkip Next Waypoint Remove Target Remove Grid Settings Edit, Delete, Go To, Target, GridSonar Window Snapshot and Recording Press Menu Snapshot and Recording View only Start Recording Stop RecordingDelete Image Delete All Images Settings 1-10, AUTO, Default = Auto Delete RecordingDelete All Recordings Pings Per Second Playback Speed Settings Record, Rewind1, Rewind2, Slow Play ReverseForward2, Stop Stop Playback Alarms Menu Tab Depth Alarm Fish ID AlarmLow Battery Alarm Settings Off, 8.5V 13.5V Default = Off Off Course Alarm Temp. AlarmModels only Default = 300 ft, 100 m Drift Alarm Arrival AlarmAlarm Tone Sonar Menu Tab Beam Select Settings Low = 1 to High = 10 Default = SwitchFireSurface Clutter Fish ID+ Settings Low = 1, High = 10 Default = Settings Wide, Narrow, Off Default = NarrowFish ID Sensitivity Real Time Sonar RTS Window KHz Sensitivity Zoom WidthDepth Lines Default = Low Noise FilterMax Depth Water Type Navigation Menu Tab Settings Save, Clear, Appearance Settings Edit, Delete, DefaultCurrent Track Saved Tracks Settings Create, Edit, Delete, Cursor To, Go To Target, Grid Waypoints Settings Create, Edit, Delete, Travel, Info Chart OrientationRoutes North Reference Waypoint DeclutteringGrid Rotation Trackpoint Interval Track Min Distance Map DatumCourse Projection Line Export All Nav Data Settings Off, On, Default = Off Continuous Navigation ModeDelete All Nav Data Chart Menu Tab Chart Detail Level Map Borders Chart Select Lat/Lon GridSpot Soundings Set Simulation Position Set Map Offset Clear Map Offset Setup Menu Tab Units Depth Units TempUnits Distance Units Speed User Mode Triplog ResetRestore Defaults Language Settings Various, Default = Off Select Readouts Settings -10.0 to +10.0 degrees, Default = Settings -20% to +20%, Default = 0%Depth Offset Temp. Offset Local Time Zone Daylight Saving TimePosition Format Time Format Date Format Settings mm/dd/yy,dd.mm.yy,yy.mm.dd Default = mm/dd/yyNmea Output Sonar Screen Snapshot Views Menu Tab Troubleshooting Fishfinder Doesn’t Power Up Display Problems Problem Possible Cause Finding the Cause of Noise Possible Source of Noise Isolation Other electronic devices Series Fishfinder Accessories Specifications Watts Peak to Peak Glossary Sonar Terms 110 111 112 GPS & Navigation Terms 114 115 116 117 Contact Humminbird