Remove Grid, Sonar Window | Humminbird 365i specification

Remove Grid

(only if a Grid is Active)

Settings: Press the RIGHT Cursor key to activate.

Remove Grid removes the waypoint grid from the display. This menu option will only appear when a grid has already been applied to a waypoint.

NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for more information.

Sonar Window

(Combo View only)

Settings: Wide, Medium, Narrow; Default = Medium

Sonar Window sets the size of the Sonar Window in the Co mbo View. Sonar Window can only be accessed from the Combo View.

Waypoint [Name]

(Most recently-created waypoint)

Settings: Edit, Delete, Go To, Target, Grid

Waypoint [Name] allows you to view the waypoints sub menu for the most recently created waypoint. You must have pressed the MARK key at least once since you last powered up the Fishfinder for this menu option to appear.

NOTE: See Introduction to Navigation for more information.

The Waypoint Submenu contains the following menu options:

Edit allows you to edit the Name, Position (Latitude and Longitude), and select the Icon that will be used to represent the waypoint in the Chart and Combo Views.

Delete allows you to delete a waypoint from the saved waypoints list.

Go To allows you to select a waypoint and start navigation toward that waypoint, or add that waypoint to the end of the current route.

Target allows you t o app ly a ta rget t o a waypoint selected fr om the saved waypoints list.

Grid allows you to apply a trolling grid to a waypoint selected from the saved waypoints list.

67	Navigation X-Press™ Menu

Image 77

Humminbird 365i manual Remove Grid, Sonar Window, Settings Edit, Delete, Go To, Target, Grid

Contents

365i Combo Operations Manual Thank You Which your product was purchased Table of Contents What’s on the 300 Series Control Head Key Functions Press Menu Main Menu Sonar Menu Tab Chart Menu Tab Setup Menu Tab Views Menu Tab Power On the Unit How Sonar Works Peak to Peak measures power output at the highest points DualBeam Plus Sonar How GPS Works What’s on the Sonar Display RTS Real Time Sonar Window Bait Ball Understanding the Sonar Display SwitchFire Bottom Presentation What’s on the Sonar Display Sonar views Views Views Sonar View Setup Menu Tab Select Readouts Sonar Zoom View 200/83 kHz Split Sonar View Big Digits View Big Digits View Circular Flasher View Snapshot and Recording View Snapshot and Recording View Screen Snapshots Active cursor Recording and Playback Down To save a Scree n Snap shot r active cursor location y ou Bird’s Eye View Bird’s Eye View Chart View Views Chart/Sonar Combo View View Orientation Views Views Waypoints, Routes, and Tracks Introduction to Navigation Waypoints, Routes, and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Waypoint Map Scale Add a Waypoint Target or Trolling Grid Save, Edit, or Delete a Route Edit, Delete, or Hide Saved Tracks Save or Clear a Current Track To insert an MMC/SD card Remove the MMC/SD slot cover Add Maps to Your Fishfinder Export Navigation Data What’s on the 300 Series Control Head Key Functions POWER/LIGHT Key Menu Key View KeyInfo Key WAY Cursor Control Key Zoom +/- Key Mark KeyGoto Key Exit Key Multi-Media Card MMC/SD Slot Menu System Normal Start-Up Options Menu Simulator Start-Up Options Menu GPS Diagnostic View Press Menu Press the Exit key to move quicklyto the top of the tab Main Menu Quick Tips for the Main Menu User Mode Normal or Advanced Sonar Tab, Normal Mode Sonar Tab, Advanced Mode Sonar Views only Sonar X-Press Menu Sensitivity Settings Low = 1, High = 20 Default = Lower Range Models only Default = AutoUpper Range Fastest Default = Chart SpeedBlack Default = Inverse Bottom View Settings Off, On Default = Off Cancel NavigationSettings Follow screen instructions to activate Bottom Lock Navigation X-Press Menu Waypoint Name Settings Edit, Delete, Target, GridCursor to Waypoint Save Current Track Save Current Route Clear Current TrackSkip Next Waypoint Remove Target Sonar Window Settings Edit, Delete, Go To, Target, GridRemove Grid Snapshot and Recording View only Snapshot and Recording Press Menu Stop Recording Start RecordingDelete Image Delete All Images Delete Recording Settings 1-10, AUTO, Default = AutoDelete All Recordings Pings Per Second Forward2, Stop Settings Record, Rewind1, Rewind2, Slow Play ReversePlayback Speed Stop Playback Alarms Menu Tab Fish ID Alarm Depth AlarmLow Battery Alarm Settings Off, 8.5V 13.5V Default = Off Models only Default = 300 ft, 100 m Temp. AlarmOff Course Alarm Alarm Tone Arrival AlarmDrift Alarm Sonar Menu Tab Beam Select Surface Clutter SwitchFireSettings Low = 1 to High = 10 Default = Fish ID+ Settings Wide, Narrow, Off Default = Narrow Settings Low = 1, High = 10 Default =Fish ID Sensitivity Real Time Sonar RTS Window Depth Lines Zoom WidthKHz Sensitivity Noise Filter Default = LowMax Depth Water Type Navigation Menu Tab Settings Edit, Delete, Default Settings Save, Clear, AppearanceCurrent Track Saved Tracks Waypoints Settings Create, Edit, Delete, Cursor To, Go To Target, Grid Routes Chart OrientationSettings Create, Edit, Delete, Travel, Info Waypoint Decluttering North ReferenceGrid Rotation Trackpoint Interval Map Datum Track Min DistanceCourse Projection Line Export All Nav Data Delete All Nav Data Continuous Navigation ModeSettings Off, On, Default = Off Chart Menu Tab Map Borders Chart Detail Level Lat/Lon Grid Chart SelectSpot Soundings Set Simulation Position Clear Map Offset Set Map Offset Setup Menu Tab Units Temp Units DepthUnits Distance Units Speed Triplog Reset User ModeRestore Defaults Language Select Readouts Settings Various, Default = Off Settings -20% to +20%, Default = 0% Settings -10.0 to +10.0 degrees, Default =Depth Offset Temp. Offset Daylight Saving Time Local Time ZonePosition Format Time Format Nmea Output Settings mm/dd/yy,dd.mm.yy,yy.mm.dd Default = mm/dd/yyDate Format Screen Snapshot Sonar Views Menu Tab Fishfinder Doesn’t Power Up Troubleshooting Problem Possible Cause Display Problems Possible Source of Noise Isolation Other electronic devices Finding the Cause of Noise Series Fishfinder Accessories Watts Peak to Peak Specifications Sonar Terms Glossary 110 111 112 GPS & Navigation Terms 114 115 116 117 Contact Humminbird