IBM 1400 (2611) manual Running Modem Dial and Data Transfer, Speaker-out Test

		FRU/Action in
Error Code	Message	Sequence
11XXX	Pointing device	Ÿ	TrackPoint
	error		board FPC
			cable
		Ÿ	TrackPoint
			board
		Ÿ	Keyboard
		Ÿ	System board

Running Modem Dial and Data Transfer

Test: Boot from the Diagnostic Program Diskette and select "Modem Dial and Data Transfer Test" from PC

7.0Startup Menu. Follow the instructions on the scre execute modem test. If the test fails, go to “ Check” on page 31.

Note: A telephone line is required for completing mo test.

Running	PCMCIA	Wrap		Card	Test:				Boot from
the	Diagnostic		Program			Diskette		and	select	"PCMCIA
Wrap	Card Test" from PC DOS 7.0 Startup Menu. Follow
the	instructions			on	the		screen	to run the PCMCIA te
The	green	LED	on	the		PC	test	card	lights	up	when
PCMCIA	test	is	running.			If the		LED	does not		light u

check whether the card is installed correctly by necting the card. If it still does not light up

nected,	try using	another	slot for the test. If
does not turn on and the			test fails, go to “PC	Ca
(PCMCIA)-Related Symptoms” on			page 43 to replace	the
possible	defective	FRU.

Running	Audio	and Speaker-out Test:		Boot
from	the	Diagnostic	Program Diskette	and	select	"Ru
Audio	Resource and		Speaker-Out Test"	from	PC DOS	7.0

Startup Menu. Follow the instructions on the screen t execute the audio test. If the test fails, go tion Check” on page 29.

Attention: You should execute this program two times (one for internal and the other for external spea verify if the system's audio function is in working

Running CD-Player Test:			Boot from the Diag-
nostic	Program	Diskette	and select "CD Player Test"
PC DOS 7.0 Startup Menu.			Follow the instructions on the
screen	to execute the CD player test. If the
“CD-ROM	Drive	Check” on	page 30.

ThinkPad i Series 1400 53(Part I)