•Disconnect the attached power cords, telecommunications systems, networks, and modems before you open the device covers, unless instructed otherwise in the installation and configuration procedures.
•Connect and disconnect cables as described in the following table when installing, moving, or opening covers on this product or attached devices.
| To Connect |
| To Disconnect | |
|
|
|
| |
1. | Turn everything | 1. | Turn everything | |
| OFF. |
| OFF. | |
2. | First, attach all | 2. | First, remove | |
| cables to devices. |
| power cords from | |
3. | Attach signal |
| outlet. | |
3. | Remove signal | |||
| cables to | |||
| connectors. |
| cables from | |
4. | Attach power |
| connectors. | |
|
| |||
| cords to outlet. | 4. | Remove all cables | |
5. | Turn device ON. |
| from devices. | |
|
| |||
|
|
|
|
•Statement 2
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
Do not:
•Throw or immerse into water
•Heat to more than 100°C (212°F)
•Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
•Statement 3
CAUTION:
When laser products (such as
•Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device.
•Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure.
